How to use PinFinder for Sagem, LG, SE, Motorola, Pantech, Fly, O2, ZTE etc.

View previous topic View next topic Go down

How to use PinFinder for Sagem, LG, SE, Motorola, Pantech, Fly, O2, ZTE etc.

Post by khanrizwan on Sat Sep 13, 2008 12:49 am

cheers How to use PinFinder for Sagem, LG, SE, Motorola, Pantech, Fly, O2, ZTE etc.

I would like to inform all infinity customers, They can use Infinity Box Auto Pin Finder not only with chinese phones, but with regular models too

Auto Pin Finder by Infinity Box Team is a great tool to have in your service center, You do not need to buy new cables
when new models are updated by infinity Box. You can just use PinFinder software and correct cable connector in Auto PinFinder
package to use it on new models

Summary

1. Auto PinFinder is a must have product for Chinese Phones
2. Auto PinFinder is a must have tool to use with all current and future updates that will be made by Infinity Box
( Eliminating the need for buying new cables every time new model is updated )

Example how PinFinder can be used saving your time and money

For Example You recieved a Sagem my150x to unlock
You can easily unlock it with Infinity-Box, BUT cable can be an issue because it uses a new cable
BUT If you have PinFinder by Infinity-Box team, it is NO PROBLEM

This is how you can use it (see the picture below)

1. Run Support Manager (Infinity-Box Shell)
2. Select model Sagem my150x and check the pinout

1..........16
9: box Rx/phone Tx (RJ45 pin-3)
10: box Tx/phone Rx (RJ45 pin-2)
16: Gnd

Open the Auto Pin Finder Package
3. Connect Power cable to phone instead of battery
4. Connect L16B cable (due to total number of connector pins is 16)
5. Select L16B cable in PinFinder Adapter software (according to connected cable)
6. Set Rx (box Rx/phone Tx) pin value to 9 (according to known pinout)
7. Set Tx (box Tx/phone Rx) pin value to 10 (according to known pinout)
8. Press “Power” button to enable phone power

In case of connection problems it may need to change pin numbering mode
(reverse pin numbering) due to different phone connector soldering to PCB. To reverse
pin numbering mode from 1.....16 to 16.....1 (and vice versa)press “Reverse”
button and then press “Set” button.

This is just an example how you can use Sagem my150x phone
with Auto PinFinder package without the need to buy new cable
Similarly you can use Auto Pinfinder with current and future infinity box
supported models

Auto PinFinder is the most universal solution for your cable needs, just
Pay once for this and eliminate the need to buy new cables again and again
Make the best use of it

_________________
avatar
khanrizwan
Moderators
Moderators

Male
Number of posts : 142
Age : 35
Registration date : 2008-09-12

View user profile

Back to top Go down

Re: How to use PinFinder for Sagem, LG, SE, Motorola, Pantech, Fly, O2, ZTE etc.

Post by pratap on Wed Aug 19, 2009 1:04 am

nice post .

pratap
active mamber
active mamber

Number of posts : 13
Age : 30
Registration date : 2008-10-05

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum